|
- Research & Development -
The main purpose for this
website and the sale of the "Limited Edition Collector Series" Craft is to
fund the all important research and development of NRG-ES. A Naturally
Renewable Generating Energy System. Below are photos of Carl Leno's Research
projects with a short description of there approach to accomplish over unity
energy generation. This important research is the very reason Carl Leno
wakes up each morning. |
|
Carls table of
ongoing research projects.
|
|
 |
|
|
|
Precessional Generator
Click Photo to Enlarge |
The
Precessional Generator is a concept conceived of back in 1997. The basic
idea is to create an attractive magnetic field for an armature to advance
into. This is accomplished by the construction of a rotor containing a bar
magnet at 45 deg. When the armature is rotated it generates a type of
precessing magnetic field. To make use of this “Wobbling” magnetic field
takes a stator configuration that falls perpendicular to the magnetic axis
two times per revolution. This creates a stator that looks like an ”X”.
When the coils are connected together with the appropriate circuitry,
rotation should ensue because there is generated an output in one with an
attractive field in the other. This unique arrangement of the “X”coil
configuration is designed to continue driving the armature once it’s
started. The project is in the final stages of construction and testing
will follow. |
|
|
|
Hydrodynamic
Proof of Concept
Click Photo to Enlarge |
The
purpose of this test bed is to generate a special type of dynamic motion
and study its characteristics. The medium used for the display is a
“fluid” or for a better description “smoke” as used in car body drag
coefficient analysis. This has a hypothetical correlation to the “Zero
Point Field” not unlike the pre-material state ether of the past. Through
this study, a clearer picture of pre-material dynamic motion may be
observed for a greater understanding of particle formation. |
|
|
|
Vectored Inertial Drive
Click Photo to Enlarge |
The
concept put forward in this layout is to develop an intense inertial field
through the use of a rotating flywheel. Once this is up to speed, an
electrical field is applied to the space around this inertial field to
cause asymmetry. This asymmetrical field distortion represents a
“Vectoring” of the inertial field originally generated. The nature of the
electrical field input to the machine is of a very specific amplitude and
frequency. The machine is completed and testing is underway.
|
|
|
|
|
|
|
